Chevron, Inc. manufacturers of quality Car Carriers

• Body
  - 1/4 smooth floor plate (steel floor)
  - 5 x 2 structural tube crossmembers on 8 inch centers
  - Floor level sides with stake pockets
  - Heavy duty approach plate with 4 chain lock

• Full length subframe
• Fixed position stabilizer
• Illuminated dual controls
• 15,000 lb. hydraulic winch with 9/16 x 100 ft. cable
• Body lock
• Mudflaps
• Federal standard 108 shock mounted lighting
• Four side marker lights
• Water resistant junction box for wire harness connection
• Lubrication fittings on all pivot points

• 3/16 or 1/4 diamond tread floor
• 5/4 Apitong (wood floor)
• Steel floor overlay on wood (not recommended)
• Additional chain locks
• Hydraulic rear stabilizer
• 20,000 lb. hydraulic winch with 5/8 x 100 ft. cable
• 30,000 lb. hydraulic winch with 11/16 x 100 ft. cable
• 8 cu. ft. water resistant aluminum tool box
• 4 cu. ft. aluminum tool box
• Factory installation
• Bi-directional shaft-driven pump - 28 or 18 GPM
• Direct mount pump/PTO

Accessories

• Bar light
• Work lights
• Switch panel
• Hydraulic throttle
• Wire control throttle
• J-hook chains
• Front hook-up chain

• Minimum GVWR - 50,000 lbs.*
• Accessible PTO opening
• Maximum frame height - 44 inches
• Minimum frame RBM each rail - 3,000,000 in • lbs.

* Load ratings are based on structural factors - not chassis cabability.

	USABLE CAB-TO-BOGIE
CARRIER LENGTH	INBOARD TILT CYLINDERS
23 24 25	138 - 144 144 - 158 156 - 168
26 27 28	168 - 180 180 - 190 190 - 196


Body Width	96 O.D. - 102 O.D.
Body Extension	120 inches
Control Valve	Sectional, 20 GPM, 2000 PSI
Oil Reservoir	26 gallons
Oil Filter	250 PSI, 30 GPM, 10 Microns
Pump	18 or 28 GPM
Body Rating*	30,000 lbs. evenly distributed
Minimum Load Angle**	14 degrees at 42 inch frame height
* Load ratings are based on structural factors - not chassis capability. ** Load angle varies with frame height and body length. Lower frames and longer bodies will produce lower load angles.